GPRS Display Board

Feature image

LED MOVING MASSAGE DISPLAY FOR ENGLISH LANGUAGE. 

Key Features of GSM/GPRS Based Display Wirless Communication :
 
1. Dual Band Module (900/1800 MHz) GSM with Class 10 GPRS 
2. Complaint With ETSI GSM Phase 2+ specification 
3. Supports Text and PDU mode 
4. GSM 07.05 and 07.07 AT Command 
5. RS 232 Port Voltage Level: 5V 
6. Input Voltage: 5 – 32 V DC (With Reverse connection protection)
7. Current: 5mA in Ideal mode, 150 mA in Communication mode.
8. Connectors: 9 Pin Sub-D Connector SMA Antenna Connector
9. SIM Card Tray/ Holder with spring loaded push 
10. LED Indication: Power ON, Network 
11. Temperature Range: Storage: -25 Deg C to +65 Deg C
12. Environment: Operating: -10 Deg C to +50 Deg C 
13. Require Power Input 220 V +/- 10 %, 50 Hz. 
14. Control Technology: 8 Bit Micro - Controller 
15. Antenna: Rubber Duct Antenna (Standard) 
16. MAXIMUM NUMBER OF LED WHICH GENERATE LIGHT
17. LOW POWER CONSUMPTION. 
18. ANIMATION DIFFERENT TYPE. 
19. DATE , TIME DAY AUTOMATICALY UPDATE. 
20. STANDERD SIZE- 3’2”X7”,5’5”X11,5’3”X9”,7’X11”, 
21. MS POWDER COATING 
22. LED 5MM(ROUND, OVAL) 
23. LED MATRIX-16(ROW)X96(COLLUM),16X128,16X160,16X192 
24. INDOOR, SEMIOUTDOOR,OUTDOOR 
25. SINGLE,DOUBLE LINE 
26. INTERFACE COMMUNICATION : BY GPRS SYSTEM 
27. TEMPERATURE 0 DEGREE CENT, HUMIDITY 0% TO 95% NON CONDENSING 

BRIEF DESCRIPTION:
• It’s a complete wireless setup and no requirement of physical connection. No distance barriers will be there and hence provides full flexibility to the user to operate the display Board from anywhere within seconds. 

• User can transmit the data on to the display boards through their mobiles or through the PC in SMS mode.

•User has to provide one activated SIM card for the GSM module attached with the display board if the user is transmitting the data through their mobile phone. 

• If the user wants to use PC interface for the transmission of data, then the user has to provide two activated SIM cards. One for the GSM transmitter and another for the GSM receiver. 

•One GSM Module is attached with the PC, which will act as GSM transmitter, and another GSM module is attached with the Display Board, which will act as GSM receiver. 

• We will provide Interface Software for the transmission of data onto the Display Board. 

•With the Interface Software, user can manipulate the data on to the Display Board. Software has its own database, which will store the data sent to the display board. So user doesn’t has to type the messages again and again for transmission. User can also see the last transmitted data on to the display Board. 

• These modules will be secured from the unauthorized access. 

• No body other than the authorize person can transmit the data on the display board. 

• The GSM receiver will erase the data from the SIM Card after receiving and reading the data from the GSM transmitter. So no hang-ups will be there as SIM Card’s memory will be always free to receive the data. 

• User can transmit the data in both the languages i.e. English and Hindi.

All Copyrights reserved by Precision Electronic Instruments Co., Website Powered by www.jkwt.co.in